What Is The Difference Between The Cavity Type Of The Spring Cone Crusher?

When purchasing spring cone crushers, you may find that they have many cavity types to choose from. So what is the difference between standard, medium and short head cone crushers? How to choose? Here, our engineers have made a professional introduction for you.

Models And Parameters Of Spring Cone Crusher

Before understanding the differences in cavity types, we need to look at the detailed spring cone crusher parameter table of AIMIX. From the table, we can see that there are three main types of AIMIX spring cone crushing cavity, namely Standard B type, Medium Z type and Short head D type. On this basis, please continue reading.

Model	Crushing cone diameter (mm)	Cavity type	Maximum feed size (mm)	Adjustment range of discharge port (mm)	Processing capacity (t/h)	Mixing power (km)	Dimension (L×W×H) (mm)	Weight (t)
APC-600Y	600 (2’ft)	B	65	12-25	12-25	30	1740×1225×1940	5.5
		D	35	3-13	5-23
APC-900Y	900 (2’ft)	B	115	15-50	50-90	55	1990×1640×2380	10.2
		Z	60	5-20	20-65
		D	40	3-13	15-50
APC-1200Y	1200 (2’ft)	B	145	20-50	110-200	110	2805×2300×2980	25.5
		Z	100	8-26	50-150
		D	50	3-15	18-105
APC-1750Y	1750 (2’ft)	B	215	25-60	280-480	160	3610×2950×4185	50.5
		Z	185	10-30	115-320			51
		D	85	5-15	75-230			52
APC-2200Y	2200 (2’ft)	B	300	30-60	590-1000	260-280	4790×3430×5080	84
		Z	235	10-30	200-580			85
		D	110	5-16	120-340			85
*Note: Technical parameters are subject to change without prior notice. 1.Standard B type is generally used in medium crushing. 2.Medium Z type is generally used for medium and fine crushing. 3.Short head D type is generally used for fine crushing.

What Is The Difference Between These Cavity Types?

Different Crushing Cavity Shapes

The cavity type is mainly related to the parallel belt of the cone crusher. This affects the taper angle and inlet size. According to the length of the parallel bands, they are distinguished as follows:

Short Head Type Cone Crusher > Medium Type Cone Crusher > Standard Type Cone Crusher

In a word, the ore inlet of standard type, medium type, and short head type gradually decreases, while the crushing cavity and parallel zone become longer.

Different Particle Sizes

• Short head D type: The crushed material is relatively fine, and it is generally used after medium crushing. Short-head cone crushers are mostly used in sand and gravel processing enterprises and construction industries.
• Medium Z type: The particle size of medium-sized cavity-type crushed materials is relatively moderate, so it is mostly used in the stage of medium and fine crushing crushers. Medium-sized cone crushers are suitable for small and medium-sized mines and construction industries.
• Standard B type: The crushed material has a coarse particle size and high output, and the crushed material can be used as secondary crushing. The standard cone crusher is suitable for large mines and metallurgical enterprises.

Different Width Of The Discharge Opening

Standard Type Cone Crusher > Medium Type Cone Crusher > Short Head Type Cone Crusher

Compared with medium-sized and short-head cone crushers, the standard cone crusher has a wider range of discharge opening width, so the processing capacity of the standard cone crusher is greater in terms of processing capacity per unit of time.

The above is the difference between these different cavity types of cone crushers. In addition, although there are some differences between standard, medium, and short-head type cone crushers, they are all commonly used types in spring cone crushers. When choosing a cone crushing machine, it is necessary to comprehensively consider factors such as stone hardness, particle size, production capacity, equipment characteristics, and performance, to ensure that the final selected equipment can meet production needs.